Robotic Welding
EN
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.
BLOK-100 – The system can be used to weld almost anything that can be manipulated by the table. FEATURES • Fanuc Welding Robot 100iC • AGT Laser Touch Sensing • 2 Axis Positioner Tilt/Rotate
The BLOK-200 is a robotic welding system dedicated to weld multiple medium sized parts. FEATURES
- Fast;
- Secure;
- Reliable;
- Flexible;
- Easy to operate.
Is a Robotic Welding System on Gantry dedicated to Power Plant Ductwork Fabricators FEATURES
- Very quick setup
- No robot immobilization
- No need for specialized labor
- Trouble-free operation
- Very simple to use.
- These ductworks are assembled via large structural steel panels previously weld. • It is where our robotic welding solution comes in handy.
This robotic welding system has been specifically developed to weld all medium to large sized assemblies and/or sub-assemblies. FEATURES
- The robot is mounted on a jib crane that can slide on a linear track unit (on the ground);
- The robot can also move transversely along the upper boom;
- In order to increase the accessibility of the robot into the assembly, a headstock-tailstock positionner rotates the part accordingly;
- All auxiliary axes are driven by servomotors and are synchronized by the robot controller.
BLOK-500 – 9 Axis Robotic Welding of Very Large Parts.
- Fanuc robot mounted on a column & boom;
- Column & boom slides on a linear track unit;
- Boom slide up and down on column;
- Robot slides along its on boom;
- Both robots working either in zone #1 or zone #2 (independent, secured);
- 2 working zones.
BLOK-600 – 10 Axis Robotic Welding of Very Large Parts.
- Fanuc robot mounted on a column & boom;
- Column & boom slides on a linear track unit;
- Boom slide up and down on column;
- Robot slides along its on boom;
- Column rotate on 360 degrees;
- Both robots working either in zone #1 or zone #2 (independent,secured);
- 2 working zones.
- Rigid and reliable structure;
- Positioners with rotating axis integrated into the main structure and aligned by laser;
- Integrated electrical cabinets and wiring embedded in the interior, which increases the reliability and productivity of the system;
- Hollow metallic protections integrated in the structure;
- Quick change of the welding areas due to the central axis of the positioner;
- Anti-radiation panels to protect the operator, controlled pneumatically;
The RackMaster our robotic welding system for rack manufacturers is a dedicated robotic production cell for welding the entire size range of pallet racking load beams to their end-clips. FEATURES
- Our Dual Robot System provides a high throughput to your production.
- Both robots weld simultaneously;
- Manage daily production and easily adapt to production peaks;
- An operator can load the machine while the welding takes place on the other side;
- When the production is done, the Ferris wheel positioner rotates and starts another cycle;
- Our vertical-down welding procedure, as well as our expertise in welding, assures high quality of welds;
- Easy to use, unload, load and start production. Fast setup with magnetic end connector holding systems;
- High precision localization system and weld routines give high quality welds and repeatability.
Conventional manufacturing of uprights is labor intensive and inefficient. Until now this has been challenging to automate because of the wide variety of upright configurations and the variances in material profiles and tolerances. FEATURES
- No programming
- 2 working zones;
- Rapid change over;
- High quality of welds;
- Easy to use, unload, load and start production;
- High precision localization system and weld routines give high quality welds and repeatability.
- Complete chassis in a compact, welded, machined and stabilised structure;
- Linear gantry in a superior position for the movement of the robot that allows an easy access to the parts to be welded and assures a less occupied ground area;
- Squadra positioners with 2 perpendicular axes (inclination and plate rotation) that assure the correct positioning of the parts to be welded;
- Integrated electrical cabinets and wiring embedded in the interior, which increases the reliability and productivity of the system;
- Hollow metallic protections integrated in the structure;
- Safety optical barriers related to the accesses during work cycles;
- Safety light barriers with emergency stop buttons;
- Option: fume extraction, multi-robot, jig.
- Rigid and reliable structure;
- 3 rotation axes, which 2 of them are independent;
- Integration of robots from the Fanuc Arc Mate series;
- Integrated electrical cabinets and wiring embedded in the interior, which increases the reliability and productivity of the system;
- Hollow metallic protections integrated in the structure;
- Quick change of the welding areas due to the central axis of the positioner;
- Central mechanical safety curtain;
- Two loading and unloading stations; -
Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua. Ut enim ad minim veniam, quis nostrud exercitation ullamco laboris nisi ut aliquip ex ea commodo consequat. Duis aute irure dolor in reprehenderit in voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident, sunt in culpa qui officia deserunt mollit anim id est laborum.